DTF UV (60cm)

Related Products

• 

  DTF UV (30cm)

  3 cabezales Epson I1600

  Maintenance

  • Daily power-on and circulation Even if you don't print, turn it on every day so the UV ink circulates and to prevent it from hardening inside the printhead.
  • Cleaning of the wiper, cap station, and surrounding areas Do this daily. UV ink is thicker and forms crusts quickly, which clogs the nozzles.
  • Avoid direct light on the ink UV inks cure with light. Keep cartridges and the plotter area away from direct sunlight or external UV lights.
  • Nozzle test 1–2 times per day UV ink tends to dry faster. This detects any clogs before they affect a job.
  • Manual cleaning of the printhead (only when necessary) Do it with UV cleaning solution and a lint-free cloth. Never use alcohol.
  • Adequate ventilation of the work area UV inks emit vapors. A ventilated environment improves equipment lifespan and operator health.

  Max width: 320mm

  Speed: 7 m2/h

  Media: Film A (with adhesive) + B

  See more

  Request a quote
• 

  AGP 2 Printheads

  2 cabezales Epson I3200

  Maintenance

  • Dust-Free Environment Keep the work environment dust-free to prevent it from affecting printing.
  • Temperature and Humidity The machine should operate at a temperature of 25–30°C and a humidity of 40–60%.
  • Platform Cleaning Keep the entire printer tidy and clean, removing dust from friction areas.
  • Cleaning the Underside of the Printhead Move the carriage to the cleaning position, clean the underside of the printhead with a non-woven cloth dampened with cleaning fluid or distilled water, removing dirt from the printhead and surrounding areas.

  Max width: 600mm

  Speed: 9 m2/h

  Media: Pet Film 620mm

  See more

  Request a quote
• 

  Plotter EPSON F570

  1 cabezal PrecisionCore® Micro TFP®

  • INK TYPE
    Epson UltraChrome DS sublimation ink (4 colors).

  • MAX RESOLUTION
    2400 dpi x 1200 dpi.

  • DIMENSIONS (W × D × H)
    970 mm × 577 mm × 245 mm.

  • DISPLAY
    4.3-inch touchscreen LCD.

  • CONNECTIVITY
    High-speed USB 3.0, Wireless LAN (802.11 b/g/n), and Wired Ethernet (1000 Base-T / 100 Base-TX / 10 Base-T).

  Maintenance

     

  • Daily power-on (even if you don't print)
    Helps the inks circulate and prevents bubbles from forming or drying out in the heads.

     

  • Automatic cleaning activated
    Let the equipment do its maintenance cycle. Do not interrupt it: it prolongs the life of the head.

     

  • Keep the capping station, dampers, and wiper clean
    These consumables accumulate ink and lint. A weekly cleaning prevents stains and clogs.

     

  • Control the ambient humidity
    Ideal: 45%–60%. Low humidity dries the ink; high humidity generates droplets on the paper.

     

  • Check feed rollers and trays
    If they are dirty, they mark the paper or generate banding.

     

  • Use the equipment at least 3–4 times per week
    Sublimation plotters need constant ink movement.

  Max width: 620 mm (24'')

  Speed: 62 seconds (for A1/D size)

  Media: Sublimation transfer paper for textiles and rigid materials

  See more

  Request a quote
• 

  M TU Tech UV 9060

  3 cabezales Epson I3200

  Maintenance

  • Daily Cleaning of the Printhead Resting System Clean the wiper, cap station, and printhead rim every day. UV ink forms crusts that can clog nozzles if not removed promptly.
  Chiller (Water Cooler) Check
  Ensure the chiller is functioning correctly.
  ✔️ Stable temperature (ideally 20–24°C)
  ✔️ Clean water and correct level
  ✔️ Change water every 30–45 days
  Improper cooling can damage the printhead in minutes.
  Vacuum System Check The vacuum should properly hold rigid parts. If suction is low, check the filters, hoses, and air intake.
  • X/Y/Z Axis Lubrication Apply appropriate lubricant every 1–2 weeks. Clean axes prevent vibrations and lines in the print.
  • Avoid Ambient UV Light UV inks cure with light. Avoid exposing the print bed or cartridges to direct sunlight or external UV light.
  • Flatbed Cleaning Keep the surface free of dust, adhesives, or material residue. Any residue can affect printhead height or damage the nozzle.

  Max width: 600mm

  Speed: 16 m2/h

  Media: Glass, Acrylic, Tile / Ceramic Tile, Aluminum, iPhone Cases, Plastic, Foam Board, Wallpaper, Wall Art, Advertising Signage, Metal, Paper, Wood, MDF, Furniture, Cards, Marble, Golf Products, Gift and Promotional Items, Leather, PU, PMMA, PVC, PP, PE, PTFE, Plexiglass, Panels, Ceilings, Cardboard, Corrugated Cardboard, Chevron Panel, Fiberboard, Brick, Stone, Home Décor, Appliance Panels, Ceramic and Porcelain Tile, 3C Products, Oil Painting, Fresco, Sliding Doors, Photos, Marking and Signage, Exhibition / Trade Show Stands, etc.

  See more

  Request a quote