Automatic Heat Press

Descripción

Description

Automatic heat press with a 38 × 38 cm work area, adjustable temperature from 0 to 210 °C, timer from 0 to 999 seconds, and 1600 W power.

Work area: 38 × 38 cm

Temperature: 0–210 °C

Timer: 0–999 seconds

Power: 1600 W

Weight: 32 kg

Power supply: 220 V / 50 Hz

COTIZAR Request a quote

Características

Key features

AUTOMATIC LIFT
Automatic structure designed to streamline the workflow.
EVEN HEATING
Uniform heat distribution across the work area.
TOUCHSCREEN
Parameter control from the digital panel.
SAFETY AND PRECISION
Thermal insulation cover and pad.
SLIDING SYSTEM
Three-section buffer with a drawer-style handle for easier operation.
PROFESSIONAL RESULTS
Precise temperature and time control.

Related Products

FEDAR FD5194E

4 cabezales Epson I3200
Features
- HIGH-PRECISION PRINT HEAD 4 Epson I3200-A1 print heads with 3200 DPI resolution and VSDT technology to improve definition, color quality, and print stability. 2-pass speed can reach up to 170 m²/h.
- THK SILENT LINEAR GUIDE Equipped with imported Japanese THK linear guide, allowing smoother carriage movement, reducing friction and noise during high-speed printing.
- LEADSHINE BRUSHLESS MOTOR High-precision Leadshine brushless motor, with better resolution, smaller length error margin, and more stable operation.
- ANTI-COLLISION CARRIAGE SYSTEM Allows the head height to be adjusted according to the material used. It also features an anti-collision system on both sides of the carriage to protect the head during operation.
- MAINTENANCE STATION WITH LIFTABLE PRINT HEAD Advanced head cleaning and moisturizing unit, easy to operate and maintain. Allows selecting automatic or manual mode.
- INK TANK AND SUB-TANK SYSTEM Continuous supply system using tank and sub-tank, ensuring constant ink output and helping maintain print quality. Includes an alarm to remind you to refill ink in time.
- FLUORINATED RUBBER PINCH ROLLER Imported fluororubber roller that helps prevent static electricity, reduce ink misting, and avoid wrinkles during printing.
- INTELLIGENT TAKE-UP UNIT WITH INFLATABLE ROLLER Supports material loads of up to 1000 m, reducing roll-change frequency. Features an oscillating shaft and sensor bar to maintain constant tension during rewinding.
- INTELLIGENT DRYER Includes an intelligent air dryer to support the printing process and improve drying performance.
- PRINT WIDTH 1900 mm print area, ideal for large-format sublimation production.
- COMPATIBLE MEDIA Works with transfer paper from 40 g to 100 g.
- RIP SOFTWARE Compatible with Maintop, Photoprint, Onyx, and neoStampa.
- COMPATIBILITY Compatible with Win 7, Win 8, and Win 10, 64-bit.
Maintenance
- DAILY POWER-ON, EVEN IF YOU DON'T PRINT Helps keep ink circulating and prevents bubbles from forming or ink from drying out in the heads.
- AUTOMATIC CLEANING ACTIVATED Let the equipment run its maintenance cycle. Not interrupting it helps prolong the head's service life.
- KEEP THE CAPPING STATION, DAMPERS, AND WIPER CLEAN These consumables can accumulate ink and lint. Weekly cleaning helps prevent stains, ink cutoffs, or clogs.
- CONTROL AMBIENT HUMIDITY Recommended range: 45%–60%. Low humidity can dry out the ink; excessive humidity can affect the paper and print quality.
- CHECK FEED ROLLERS AND TAKE-UP SYSTEM Keeping them clean helps prevent marks on the paper, wrinkles, or tension issues during operation.
- USE THE EQUIPMENT FREQUENTLY Sublimation plotters need constant ink circulation. It's recommended to use the equipment at least 3–4 times per week.
Max width: 1900mm

Speed: 170 m²/h

Media: Sublimation paper / transfer paper

See more

Request a quote
Plotter UV 3040

1 Epson I3200 printhead
- SPEED
  0.28 m²/h - 3 m²/h
- MEDIA
  Glass, plates, various signs, crystal...
Maintenance
- Daily Power On and Circulation Even if you're not printing, turn it on every day to circulate the UV ink and prevent it from hardening inside the printhead.
- Cleaning the Wiper, Cap Station, and Surrounding Area Do this daily. UV ink is thicker and crusts up quickly, clogging the nozzles.
- Avoid Direct Light on the Ink UV inks are cured by light. Keep the cartridges and the plotter area away from sunlight or external UV lights.
- Nozzle Check 1–2 Times a Day UV ink tends to dry faster. You detect any cuts before they affect a job.
- Manual printhead cleaning (only when necessary) Do this with UV cleaning solution and a lint-free cloth. Never use alcohol.
- Proper ventilation of the work area UV inks emit fumes. A well-ventilated environment improves the life of the equipment and the health of the operator.
Max width: 420mm

Speed: 3 m2/h

Media: Glass, plates, advertising signage, crystal, PVC, acrylic, synthetic leather, etc.

See more

Request a quote
Plotter EPSON F570

1 PrecisionCore® Micro TFP® printhead
- INK TYPE
  Epson UltraChrome DS sublimation ink (4 colors).
- MAX RESOLUTION
  2400 dpi x 1200 dpi.
- DIMENSIONS (W × D × H)
  970 mm × 577 mm × 245 mm.
- DISPLAY
  4.3-inch touchscreen LCD.
- CONNECTIVITY
  High-speed USB 3.0, Wireless LAN (802.11 b/g/n), and Wired Ethernet (1000 Base-T / 100 Base-TX / 10 Base-T).
Maintenance
- Daily power-on (even if you don't print)
  Helps the inks circulate and prevents bubbles from forming or drying out in the heads.
- Automatic cleaning activated
  Let the equipment do its maintenance cycle. Do not interrupt it: it prolongs the life of the head.
- Keep the capping station, dampers, and wiper clean
  These consumables accumulate ink and lint. A weekly cleaning prevents stains and clogs.
- Control the ambient humidity
  Ideal: 45%–60%. Low humidity dries the ink; high humidity generates droplets on the paper.
- Check feed rollers and trays
  If they are dirty, they mark the paper or generate banding.
- Use the equipment at least 3–4 times per week
  Sublimation plotters need constant ink movement.
Max width: 620 mm (24'')

Speed: 62 seconds (for A1/D size)

Media: Sublimation transfer paper for textiles and rigid materials

See more

Request a quote
DTF UV (60cm)

3 cabezales Epson I3200
Maintenance
- Daily Power On and Circulation Even if you're not printing, turn it on every day to circulate the UV ink and prevent it from hardening inside the printhead.
- Cleaning the Wiper, Cap Station, and Surrounding Area Do this daily. UV ink is thicker and crusts up quickly, clogging the nozzles.
- Avoid Direct Light on the Ink UV inks are cured by light. Keep the cartridges and the plotter area away from sunlight or external UV lights.
- Nozzle Check 1–2 Times a Day UV ink tends to dry faster. You detect any cuts before they affect a job.
- Manual printhead cleaning (only when necessary) Do this with UV cleaning solution and a lint-free cloth. Never use alcohol.
- Proper ventilation of the work area UV inks emit fumes. A well-ventilated environment improves the life of the equipment and the health of the operator.
- Cooling system maintenance Check the water in the chiller or printhead cooling system. If the cooling fails, the printhead can be damaged in minutes.
Max width: 620mm

Speed: 10 m2/h

Media: Film A (with adhesive) + B / Film A (without adhesive) + B

See more

Request a quote